Sr. Manufacturing Technician

The Senior Manufacturing Technician, reporting to the Production Manager, is a member of the production team and is responsible for performing the assembly, inspection and testing of laser systems. This position also, adjusts optics, operates test equipment and collects data during product testing throughout production. The Senior Test Technician assists in the continuous improvement of vendor and component selection, manufacturing and quality processes, assembly instructions, and all necessary manufacturing documentation.

Location

• Santa Clara, California

NOTE:  These job descriptions are not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

To apply for this job posting please send a resume via eMail to careers@optimedica.com

Algorithm Developer / Systems Analysis

OptiMedica is looking for an experienced algorithm developer / systems analyst to support the development and production of its expanding line of innovative ophthalmic instruments. Candidate must be fluent in LTI systems, fluent in implementation of algorithms on physical systems, and ideally would have experience in optics, real time optimization, image processing, C/C++, Labview, Labview programming for FPGA, software best practices, and be familiar with medical device environment and its regulations. Ability to quickly solve challenging problems in unfamiliar domains is essential. Candidate will function as a key trade-off maker for complex medical systems.

Strong skills and experience with tools such as Matlab, Excel, and ability to develop skills in LabVIEW programming for FPGA, LabVIEW applications, and higher level applications on Windows operating systems are required in order to develop and supervise automated test, measurement, data acquisition, and control systems. Must be able to work with limited guidance/supervision and be able to test, evaluate, document, qualify and release designs for complex projects involving medical laser equipment in a focused, highly collaborative multidisciplinary environment.

NOTE:  These job descriptions are not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

To apply for this job posting please send a resume via eMail to careers@optimedica.com

Software Engineer/LabView Programmer

OptiMedica is looking for an experienced Software Engineer/LabVIEW Programmer to support the development and production of its expanding line of innovative ophthalmic instruments. Candidate must be familiar with LabView programming and Software best practices, be familiar with medical device environment and its regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect for complex medical systems.

Strong skills and experience with LabVIEW programming for FPGA, LabVIEW applications, and higher level applications on Windows operating systems are required in order to develop automated test, measurement, data acquisition, and control systems. Must be able to work with limited guidance/supervision and be able to test, evaluate, document, qualify and release designs for complex projects involving medical laser equipment in a focused, highly collaborative multidisciplinary environment.

NOTE:  These job descriptions are not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

To apply for this job posting please send a resume via eMail to careers@optimedica.com

Software / Firmware Engineer

OptiMedica is looking for an experienced Software / Firmware Engineer to support the development and production of its expanding line of innovative ophthalmic instruments. Candidate must be experienced in low level hardware software/firmware design, fault detection and recovery, state machine design and implementation, and have the ability to work the electrical engineers to review designs to ensure end to end product function.

Familiarity with Labview programming and Labview FPGA, medical device environment and its regulations is a substantial asset. Must be able to conceptualize, architect, and implement hardware controllers that meet product needs, yet be seamlessly integrated with manufacturing test stations for efficient production. Must be able to work with limited guidance/supervision and be able to test, evaluate, document, qualify and release designs for complex projects involving medical laser equipment in a focused, highly collaborative multidisciplinary environment.

NOTE:  These job descriptions are not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

To apply for this job posting please send a resume via eMail to careers@optimedica.com

Electrical/Electronics Manufacturing Engineer

OptiMedica is looking for an experienced Electrical/Electronic Manufacturing Engineer to support the production of its expanding line of innovative ophthalmic instruments. Candidate must be familiar with electrical and electronic best practices and have ability to quickly solve challenging problems.

Strong skills and experience in analog and digital electronics design, analysis and testing. Candidate will actively participate in component selection & specification across multiple projects. Must be able to work with limited guidance/supervision and be able to test, evaluate, document, qualify and release designs for complex projects involving medical laser equipment.

Will work in a team environment with other engineers (of varied disciplines) as well as management and manufacturing personnel to sustain/improve existing products and deliver new products to market.

Job Functions:

• Applies electrical and electronic engineering principles and concepts to evaluate new designs for function and performance. System integration of new components and designs into high performance optical and opto-mechanical systems and sub-systems.
• Work with outside suppliers, PCBA Designers, Board Fabrication Houses, PCBA assemblers, Cable manufacturers and contract manufacturers for development, qualification, release and introduction of new electrical and electronic systems, boards, components and cables into production.
• Collect/ review data and communicate both status and recommendation on technical issues by preparing technical reports and presentations.
• Initiate, execute & review product changes via OptiMedica’s ECO process.
• Provide support for incoming component & PCBA inspection, tracking of component issues, and supplier interfacing to assure product quality.
• Provide continuous support for manufacturing and resolve complex electrical/electronic manufacturing issues.
• Develop assembly instructions, test methods, PCBA test procedures and create test and qualification reports for new product introduction.
• Reports to Director of Product Development and/or the Director of Operations.
• Resolve non-conforming material issues/in-process failures and represent department through the Material Review Board (MRB) process.
• Generate IQ and OQ test protocols/reports for equipment and fixtures.

Requirements / Skills:

• Highly developed problem solving, communication and teamwork skills.
• Solid background in analog and digital circuit design.
• Experience with Lab View and NI products a plus.
• Five years experience working with product development team to transfer new products into production for commercial sale. Key participation in the test and integration of successfully shipped medical products is strongly preferred.
• Knowledge, experience and understanding of electrical & electronic drawing standards, schematics and Gerber files. Experience with ORCAD Schematic Capture and Board Layout Design strongly preferred.
• Must be well organized and enjoy working in a dynamic environment.
• Strong written and verbal communication skills.
• Familiar with Electrical Safety & EMC/EMI Qualification Testing for Medical Equipment.
• Experience with, and full understanding of, Design For Manufacture and Assembly (DFMA) principles and practices.

Education/Experience:
Bachelor’s degree in electronic engineering or equivalent.

Language Ability:
Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.

Math Ability:
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis.

Reasoning Ability:
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Computer Skills:
To perform this job successfully, an individual should have knowledge of Development software; Design software; Project Management software and Manufacturing software.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.

NOTE:  These job descriptions are not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

To apply for this job posting please send a resume via eMail to careers@optimedica.com